Soporte para 10 pares de mancuernas
Soporte para 10 pares de mancuernas
SKU: F12CA012
The 10 Pairs Dumbbell Rack by Alex Athletics is the commercial standard for heavy weight storage. This robust 2-tier horizontal rack features a massive oval steel frame designed to hold a full run of dumbbells (e.g., 2.5kg-25kg) with rock-solid stability. Individual rubber saddles protect your weights from damage and prevent rolling, while the offset tier design ensures safe, ergonomic access to the bottom row. Built for high-traffic gyms, it offers the durability, safety, and professional organization required for serious strength training zones.
The Commercial Standard: 2-Tier Horizontal 10 Pairs Dumbbell Rack
When it comes to heavy lifting and commercial gym outfitting, the horizontal tray rack is the undisputed king. The 10 Pairs Dumbbell Rack (2 Tier) by Alex Athletics is a professional-grade storage system designed to hold a full run of heavy dumbbells (typically 2.5kg to 25kg, or heavier sets split across racks). Unlike vertical towers which are limited by weight balance, this horizontal design creates a low, wide center of gravity that is incredibly stable. It allows for the storage of the heaviest dumbbells with absolute safety. The frame is constructed from massive oval steel tubing (60x120mm), welded into a single-piece structure for maximum rigidity. It is a tank designed to survive the daily impact of 50kg dumbbells being racked by fatigued athletes.
The rack features individual “saddles” (cradles) made of durable rubber or plastic. These saddles are crucial for three reasons: they organize the weights with correct spacing, preventing smashed fingers; they protect the dumbbell knurling and heads from metal-on-metal wear; and they keep round dumbbells from rolling off. The tiered design is angled (offset) to make racking the bottom row easy without hitting your hands on the top row. With a length of over 2.2 meters, this rack makes a statement. It is the centerpiece of a free weight zone, offering the accessibility, durability, and safety required by professional strength facilities.
1. Heavy-Duty Horizontal Stability
Gravity is on your side. The low, wide stance of this rack means it cannot be tipped over. It is designed to hold heavy commercial sets (e.g., 2.5kg-25kg). The horizontal layout allows you to walk up to the weight, lift it with a proper deadlift mechanic, and step back, which is the safest way to handle heavy bells.
2. Protective Individual Saddles
The rack features 20 individual saddles. These cups hold each dumbbell in a fixed position. This organization looks professional and prevents the weights from sliding into each other. The saddle material acts as a buffer, preserving the finish of your expensive urethane or rubber dumbbells and dampening noise.
3. Offset Tier Design
Ergonomics are critical. The top tier is set back relative to the bottom tier. This “offset” ensures that when you are placing a heavy weight on the bottom shelf, you don’t scrape your knuckles or wrists against the weights above. It allows for a natural, safe racking motion.
4. Massive Oval Steel Frame
This is commercial furniture. The main frame is built from 60x120mm oval steel tubing with a 2.5mm wall thickness. This gives the rack an enormous load capacity and a modern, high-end aesthetic. It is finished with a premium powder coat that resists chips and corrosion.
5. Floor Protection
The feet of the rack are equipped with rubber pads. These prevent the heavy rack from sliding on the floor and protect the subfloor (carpet, rubber, or wood) from indentation and scratches. It ensures the rack sits level and secure.
¿A quién va dirigido?
- Gimnasios comerciales y gimnasios.
- University and professional sports weight rooms.
- Home gyms with a full 2.5-25kg set and ample space.
- Facilities using round-head commercial dumbbells.
- Anyone prioritizing safety and ease of racking.
Especificaciones del producto
| Modelo | F12CA012 |
| Tipo | 2-Tier Horizontal Rack |
| Capacidad | 10 Pairs (Commercial) |
| Dimensiones | L 2210 x W 703 x H 823 mm |
| Características | Rubber Saddles, Offset Tiers |
Política de muestras
Estamos encantados de proporcionar muestras de productos para que los clientes evalúen la calidad o realicen pruebas. El proceso suele comenzar con un presupuesto basado en las especificaciones del cliente.
Los preparativos de las muestras se harán en función del resultado de las conversaciones entre nuestro equipo de ventas y el cliente.
Proceso de pedido
Tras confirmar los requisitos del producto y otros detalles con el cliente, emitiremos una Confirmación de Venta para su aprobación.
Las condiciones de pago y los acuerdos de envío se determinarán en función del resultado de las conversaciones entre nuestro equipo de ventas y el cliente.